TCP/IP Configuration and Management Manual

SCF Reference
TCP/IP Configuration and Management Manual—427132-004
4-41
INFO PROCESS Command
INFO PROCESS Command
The INFO PROCESS command displays the current attribute values for the TCP/IP
process object.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
DETAIL
specifies that the display is to include additional detailed information on the object.
PROCESS process-name
is a valid process name indicating the desired TCP/IP process. If you omit the
object name, SCF uses the assumed object name. For information about the
ASSUME command, see the SCF Reference Manual for G-Series RVUs or the
SCF Reference Manual for H-Series RVUs.
Examples
The following command displays the current attributes of the PROCESS object without
the DETAIL option:
1-> INFO PROCESS $ZTC0
The following command displays the current attributes of the PROCESS object with the
DETAIL option:
1-> INFO PROCESS $ZTCO, DETAIL
INFO PROCESS Display Format
The format of the display for the INFO PROCESS command without the DETAIL option
is:
INFO [ / OUT file-spec / ] [ PROCESS process-name ]
[ , DETAIL ]
SCF> INFO PROCESS $ZTC0
TCPIP Info PROCESS \SYSA.$ZTC0
*TCPSendSpace *TCPReceiveSpace *UDPSendSpace *UDPReceiveSpace
8192 8192 8192 8192