TCP/IP Configuration and Management Manual

SCF Reference
TCP/IP Configuration and Management Manual—427132-004
4-42
INFO PROCESS Command
TCPSendSpace
is the amount of data (in bytes) that can be buffered in the TCP layer when sending
data to a remote site.
TCPReceiveSpace
is the amount of data (in bytes) that can be buffered in the TCP layer when
receiving data from a remote site.
UDPSendSpace
is the amount of data (in bytes) that can be buffered in the UDP layer when
sending data to a remote site.
UDPReceiveSpace
is the amount of data (in bytes) that can be buffered in the UDP layer when
receiving data from a remote site.
INFO PROCESS Display Format With DETAIL
The format of the display for the INFO PROCESS command with the DETAIL option is:
TCP Send Space
is the amount of data (in bytes) that can be buffered in the TCP layer when sending
data to a remote site.
SCF> INFO PROCESS $ZTC0, DETAIL
TCPIP Detailed Info PROCESS \SYSA.$ZTC0
*TCP Send Space......... 8192D *TCP Receive Space...... 8192D
*UDP Send Space......... 8192D *UDP Receive Space...... 8192D
*Delay Ack Time......... 20 *Delay Ack.............. ON
*Keep Alive Idle........ 45 *Keep Alive Retry Count. 8
*Keep Alive Interval.... 45 QIO Limit.............. 100%
*Host ID................ 0.0.0.0
*Host Name.............. sysa.Tandem.COM
Program Filename....... \SYSA.$SYSTEM.SYS00.TCPIP
*Debug.................. OFF
*Full Dump.............. ON
*All Nets Are Local..... ON
*TCP Compat 42.......... ON
*EXPAND Security........ OFF
*TCP Path MTU........... OFF
*TCP Time Wait.......... 60
Trace Status............ OFF
Trace Filename..........
*ARP Timer Refreshed ... OFF
*RFC1323 Enable ........ ON
*TCP Init Rexmit Timeout 1000 ms
*TCP Min Rexmit Timeout. 400 ms
*TCP Listen Queue Min... 5
*Initial TTL............ 30