TCP/IP Configuration and Management Manual

SCF Reference
TCP/IP Configuration and Management Manual—427132-004
4-44
INFO PROCESS Command
Program Filename
is the name of the file being executed for this process.
Debug
is the current setting (ON or OFF) of the DEBUG attribute.
Full Dump
is the current setting (ON or OFF) of the FULLDUMP attribute.
All Nets Are Local
indicates whether TCP uses the interface MTU as a base for determining the TCP
Maximum Segment Size (MSS) for each non-local TCP connection (ON), or
whether TCP conforms to RFC-specified behavior and use 512 bytes as the
default MSS for non-local segments (OFF).
TCP Compat 42
is the flag that sets the NonStop TCP/IP process compatible with BSD4.2 versions,
If the flag is ON, then the original ACK minus 1 is sent in the keepalive packet; if
the flag is OFF, the original ACK is sent in the keepalive packet.
EXPAND Security
indicates whether or not.TCPchecks if a SOCKET request from another Expand
node has passed the Expand security check.
TCP Path MTU
indicates whether or not TCP uses PATH MTU discovery on all TCP-type sockets
(SOCK_STREAM) unless disabled by the SETSOCKOPT for SO_PMTU.
TCP Time Wait
is the amount of time in seconds that a TCP connection remains in the TIME_WAIT
state. The default is 60 seconds. The range is 1 to 120.
Trace Status
is ON when the process is being traced using SCF.
Trace Filename
is the name of the current trace file.
ARP Timer Refreshed
indicates whether or not TCP restarts the ARP timer every time the ARP table
entry is referenced when transmitting an IP packet. The default for this option is
OFF. If this option, is enabled stale ARP table entries can take longer to be flushed.