TCP/IP Configuration and Management Manual

SCF Reference
TCP/IP Configuration and Management Manual—427132-004
4-47
INFO SERVER Command
Type
indicates one of three types of routes:
Metric
indicates the number of hops to the destination.
INFO SERVER Command
The INFO SERVER command displays information about the server. This is a
nonsensitive command.
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
SERVER server-spec
is the name of the server. The fully-qualified server-spec has the form:
If you specify the SCF object type (SERVER) or any portion of the object name
(server-spec) in a prior ASSUME command, you can omit it in this command.
For information about the ASSUME command, see the SCF Reference Manual for
G-Series RVUs or the SCF Reference Manual for H-Series RVUs.
Example
The following commands return information about all currently registered servers.
1-> ASSUME PROCESS $ZTC0
2-> INFO SERVER *
blank routes to a network.
G routes to a network through a gateway.
H routes to a host.
H,G routes to a host through a gateway.
INFO [ /OUT file-spec/ ] [ SERVER server-spec ]
$process-name . #server-name