TCP/IP Configuration and Management Manual

SCF Reference
TCP/IP Configuration and Management Manual—427132-004
4-48
INFO SUBNET Command
INFO SERVER Display Format
The display format for INFO SERVER is:
Name
is the name of the server.
AtmAddr
is the ATM address of the server.
Subnet
is the name of the SUBNET to which the server is associated.
INFO SUBNET Command
The INFO SUBNET command displays the current attribute values for the specified
SUBNETs.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
SUBNET subnet-spec
names the point of connection between the NonStop TCP/IP process and an I/O
device. The fully-qualified subnet-spec has the form:
If you specify the SCF object type (SUBNET) or any portion of the object name
(subnet-spec) in a prior ASSUME command, you can omit it in this command.
For information about the ASSUME command, see the SCF Reference Manual for
G-Series RVUs or the SCF Reference Manual for H-Series RVUs.
TCPIP Info SERVER \SAMCAT.$ZTCY.*
Name: #SRV2 Subnet #EN1
AtmAddr... (NSAP)
47:00:05:80:FF:E1:00:00:00:F2:1A:29:EB:00:00:00:00:01:A2:00
INFO [ / OUT file-spec / ] [ SUBNET subnet-spec ]
[, DETAIL ]
$process-name . #subnet-name