TCP/IP Configuration and Management Manual

SCF Reference
TCP/IP Configuration and Management Manual—427132-004
4-53
INFO SUBNET Command
SUBNETMASK
is a 32-bit integer that specifies which portion of the network number and the IP
host address is to be masked to define a subnet.
SuName
is the name of the X.25 subdevice used by the SUBNET.
QIO
shows whether or not the SUBNET is currently using the QIO interface. QIO is
always on for Ethernet, ATM and SNAP type SUBNETs. (This attribute is not
applicable for X25AM SUBNETs.) ON indicates that the interface is currently using
QIO mode. OFF indicates that the interface is not currently using QIO mode.
R
shows whether or not the ICMP Router Discovery Protocol (IRDP) has been
enabled on the SUBNET. The displayed value can be Y (IRDP is ON), or N (IRDP
is OFF).
Trace Status
is ON if the SUBNET is being traced with SCF.
Trace Filename
is the name of the current trace file.
Interface MTU
is the maximum transmission unit that can be used on the SUBNET.
GATEWAY
makes the TCP/IP process the gateway for routing IP traffic between multiple
subnets when set to ON.
Multicast Groups
indicates the IP multicast group addresses that the TCP/IP process is listening to.
State
is the current state of the socket; it applies only to sockets whose Proto value is
TCP. The possible values are:
STARTED
indicates that multicast is operational for the group.