TCP/IP Configuration and Management Manual

SCF Reference
TCP/IP Configuration and Management Manual—427132-004
4-54
LISTOPENS Command
STARTING
indicates that the multicast group is transitioning to the STARTED (and
operational) state but is not yet fully operational.
STOPPED
indicates that multicast is not operational for the group.
Considerations

The object-name template (wildcard notation) is supported.

The STATUS and STATS commands provide information on the summary state
and the statistics of TCP/IP objects.
LISTOPENS Command
The LISTOPENS command returns information on openers of the TCP/IP process.
This is a nonsensitive command.
LISTOPENS PROCESS Command
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
PROCESS process-name
is a valid process name indicating the desired TCP/IP process. If you omit the
object name, SCF uses the assumed object name. For information about the
ASSUME command, see the SCF Reference Manual for G-Series RVUs or the
SCF Reference Manual for H-Series RVUs.
DETAIL
specifies that the display is to include additional detailed information on the object.
LISTOPENS [ / OUT file-spec / ] [ PROCESS process-name ]
[ , DETAIL ]