TCP/IP Configuration and Management Manual

SCF Reference
TCP/IP Configuration and Management Manual—427132-004
4-56
LISTOPENS PROCESS Command
Lport
is the local port number for either TCP or UDP, depending on the value of Protocol.
The more common port values are displayed in text form; others are displayed as
four-decimal octets.
LISTOPENS Display Format With DETAIL
The format of the display for the LISTOPENS command with the DETAIL option is a
combination of the displays for the LISTOPENS and STATUS PROCESS commands:
Opener
is the process name of the opener of the TCP/IP process.
Ppid
is the primary processor and PIN of the opener.
Bpid
is the backup processor and PIN of the opener.
Plfn
is the logical file number of the primary opener process.
Blfn
is the logical file number of the backup opener process.
Proto
is the protocol associated with the socket, which can be UDP (for a UDP socket),
TCP (for a TCP socket), or a protocol number (for a raw IP socket).
SCF> LISTOPENS PROCESS $ZTC0,DETAIL
TCPIP Detailed Listopens PROCESS \SYSA.$ZTC0.*
Opener $ZTNT Ppid 0,279 Bpid Plfn 3 Blfn 0
Proto TCP State LISTEN SendQ 0 RecvQ 0
Laddr 0.0.0.0 Lport telnet
Faddr 0.0.0.0 Fport *
Opener $ZPORT Ppid 0,280 Bpid Plfn 3 Blfn 0
Proto TCP State LISTEN SendQ 0 RecvQ 0
Laddr 0.0.0.0 Lport echo
Faddr 0.0.0.0 Fport *
Opener $ZPORT Ppid 0,280 Bpid Plfn 3 Blfn 0
Proto TCP State LISTEN SendQ 0 RecvQ 0
Laddr 0.0.0.0 Lport finger
Faddr 0.0.0.0 Fport *
Opener $ZPORT Ppid 0,280 Bpid Plfn 3 Blfn 0
Proto TCP State LISTEN SendQ 0 RecvQ 0
Laddr 0.0.0.0 Lport ftp
Faddr 0.0.0.0 Fport *