TCP/IP Configuration and Management Manual

SCF Reference
TCP/IP Configuration and Management Manual—427132-004
4-59
NAMES ROUTE Command
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
ADDRMAP process-name
specifies the name of the TCP/IP process. If you omit the object name, SCF uses
the assumed object name. For information about the ASSUME command, see the
SCF Reference Manual for G-Series RVUs or the SCF Reference Manual for H-
Series RVUs.
Example
The following command requests the names of the ADDRMAP objects on the system:
1->NAMES ADDRMAP $ZTC0.*
NAMES ADDRMAP Display Format
The format of the display for the NAMES ADDRMAP command is:
NAMES ROUTE Command
The NAMES ROUTE command displays the names of the routes for the NonStop
TCP/IP subsystem.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
NAMES [ / OUT file-spec / ] [ ADDRMAP process-name ]
TCPIP Names ADDRMAP \SYSA.$ZTC0.*
ADDRMAP
#A1 #A2 #A3
NAMES [ / OUT file-spec / ] [ ROUTE route-spec ]