TCP/IP Configuration and Management Manual

SCF Reference

TCP/IP Configuration and Management Manual—427132-004

4-64

STATS Command

The STATS command returns statistics for a specified TCP/IP object. All statistics are

32-bit numbers. The letter D in the display values indicates that the value is a

doubleword.

Whenever a RESET option is included, the counters associated with the specified

objects are displayed and reset to 0, and the timestamp for the reset is recorded. Any

STATS command returns the time at which the current statistics were sampled and the

time at which the counters were last reset.

This is a sensitive command when used with the reset option.

STATS ADDRMAP Command

The STATS ADDRMAP command returns statistics for a specific address name entry

in the NonStop TCP/IP X.25 address table.

Command Syntax

OUT file-spec

causes any SCF output generated for this command to be directed to the specified

file.

ADDRMAP addrmap-spec

defines the entry name in the NonStop TCP/IP X.25 address table for which

statistics are requested. The fully-qualified addrmap-spec has the form:

If you specify the SCF object type (ADDRMAP) or any portion of the object name

(addrmap-spec) in a prior ASSUME command, you can omit it in this command.

For information about the ASSUME command, see the SCF Reference Manual for

G-Series RVUs or the SCF Reference Manual for H-Series RVUs.

Example

The following command requests statistics for the specified ADDRMAP:

1->STATS ADDRMAP $ZTC0.*

STATS [ / OUT file-spec / ] [ ADDRMAP addrmap-spec ]

[ , RESET ]

$process-name .#addrmap-name