TCP/IP Configuration and Management Manual

SCF Reference
TCP/IP Configuration and Management Manual—427132-004
4-66
STATS PROCESS Command
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
PROCESS process-name
is a valid process name indicating the desired TCP/IP process. If you omit the
object name, SCF uses the assumed object name. For information about the
ASSUME command, see the SCF Reference Manual for G-Series RVUs or the
SCF Reference Manual for H-Series RVUs.
RESET
resets the statistical counters to zero.
Examples
The following commands requests statistics about the specified process:
1-> STATS PROCESS $ZTC0
1-> ASSUME PROCESS $ZTC0
2-> STATS
STATS [ / OUT file-spec / ] [ PROCESS process-name ]
[ , RESET ]