TCP/IP Configuration and Management Manual

SCF Reference
TCP/IP Configuration and Management Manual—427132-004
4-70
STATS PROCESS Command
network congestion. The retransmission timer expires when a packet is not
acknowledged within a certain time.
Packet retransmission can be caused by any of the following conditions: the
network is overloaded; the other end of the connection is overloaded (so that
appropriate acknowledgments cannot be received and/or sent); or a corrupted
packet (that is, a packet with an invalid checksum) is received.
Connections Closed
is the number of connections closed (this value includes the number of
connections dropped).
Connections Dropped
is the number of connections dropped.
Control Packets Sent
is the number of SYN, FIN, and RST control packets sent.
Data Bytes Received
is the number of bytes received in sequence.
Data Bytes Sent
is the total number of data bytes sent.
Data Packets Received
is the number of packets received in sequence.
Data Packets Sent
is the total number of data packets sent.
Data Predictions OK
is the number of times the header predictions were correct for data packets.
Delayed ACKs Sent
is the number of delayed ACKs sent.
Duplicate ACKs Recv
is the number of duplicate ACK packets received.
Duplicate Bytes Recv
is the number of duplicate bytes received.