TCP/IP Configuration and Management Manual

SCF Reference
TCP/IP Configuration and Management Manual—427132-004
4-85
STATS ROUTE Command
Bad Checksum
is the total number of IGMP packets received that had an incorrect checksum.
Total Queries Input
is the total number of IGMP query packets received.
Bad Queries
is the total number of IGMP query packets received with the IP destination address
not equal to the all hosts group.
Total Reports Input
is the total number of IGMP membership reports received.
Bad Reports
is the total number of bad IGMP membership reports received.
Reports For Our Groups
is the total number of IGMP membership reports received for groups we belong to.
STATS ROUTE Command
The STATS ROUTE command displays the NonStop TCP/IP subsystem statistics for
the specified routes.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
ROUTE route-spec
specifies the path on which data is sent in order to reach a destination. The fully-
qualified route-spec has the form:
If you specify the SCF object type (ROUTE) or any portion of the object name
(route-spec) in a prior ASSUME command, you can omit it in this command. For
Note. STATS ROUTE with the RESET option is sensitive.
STATS [ / OUT file-spec / ] [ ROUTE route-spec ]
[, RESET ]
$process-name . #route-name