TCP/IP Configuration and Management Manual

SCF Reference
TCP/IP Configuration and Management Manual—427132-004
4-87
STATS SUBNET Command
STATS SUBNET Command
The STATS SUBNET command displays the NonStop TCP/IP subsystem statistics for
the specified SUBNETs. This is a nonsensitive command unless the RESET option is
specified.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
SUBNET subnet-spec
names the point of connection between the NonStop TCP/IP process and an I/O
device. The fully-qualified subnet-spec has the form:
If you specify the SCF object type (SUBNET) or any portion of the object name
(subnet-spec) in a prior ASSUME command, you can omit it in this command.
For information about the ASSUME command, see the SCF Reference Manual for
G-Series RVUs or the SCF Reference Manual for H-Series RVUs.
RESET
resets the statistical counters to zero.
DETAIL
requests the detailed status information for the SUBNET.
Examples
The following example request statistics for all running SUBNETs:
1->STATS SUBNET \SYSTEM.$ZTC8.*
STATS [ / OUT file-spec / ] SUBNET subnet-spec
[ , RESET ] [ , DETAIL ]
$process-name .#subnet-name