TCP/IP Configuration and Management Manual

About This Manual
TCP/IP Configuration and Management Manual—427132-004
xvi
X25AM Manuals

The TCP/IP TELNET Management Programming Manual describes the
command/response interface and the EMS interface available to an application
program for communication with the TCP/IP TELNET process.

The QIO Configuration and Management Manual describes how to install and
manage a QIO data communications subsystem. This manual also describes the
SCF command used to configure, control, and inquire about the QIO subsystem

The Open System Services Shell and Utilities Reference Manual documents the
contents of the inetd configuration file.

The ATM Configuration and Management Manual documents the Asynchronous
Transfer Mode (ATM) product.

The DNS Configuration and Management Manual provides information about the
BIND 9.x-based DNS subsystem available for G06.25 and later RVUs and H06.03
and later RVUs.
X25AM Manuals
The X25AM subsystem manual set includes the following manuals:

The X25AM Configuration and Management Manual describes how to install and
configure the X25AM communications subsystem on NonStop S-series systems.
This manual also describes the Subsystem Control Facility (SCF) for X25AM.

The X25AM Programming Manual describes the programming requirements for
developing an X25AM application.

The X25AM Management Programming Manual describes the management-
programming interfaces to the X25AM subsystem and how to use them.