TCP/IP Configuration and Management Manual

SCF Reference
TCP/IP Configuration and Management Manual—427132-004
4-89
STATS SUBNET Command
Input Errors
is the number of errors detected when packets were received by the SUBNET.
Each input error also generates one of the following operator messages:
DEVICE READ ERROR error ON IOP iopname
DEVICE WRITE ERROR error ON IOP iopname
ERROR error ON IOP iopname
Output Errors
is the number of errors that occurred when packets were sent by the SUBNET.
Each output error also generates one of the following operator messages:
DEVICE READ ERROR error ON IOP iopname
DEVICE WRITE ERROR error ON IOP iopname
ERROR error ON IOP iopname
Considerations

The object-name template (wildcard notation) is supported.

STATS is a nonsensitive command without the RESET option; it is a sensitive
command with the RESET option.

To initialize (set to zero) the statistical counters, use the RESET option. STATS,
RESET is sensitive.

The STATS command returns the time at which the current statistics were sampled
and the time at which the counters were last reset.

If the RESET option is specified, the counters associated with the ADDRMAP
object are displayed and then set to 0. The timestamp for the reset operation is
recorded and the Last Time Used field is set to 0.