TCP/IP Configuration and Management Manual

SCF Reference
TCP/IP Configuration and Management Manual—427132-004
4-98
STATUS PROCESS Command
SYN-SENT
if waiting for a SYN-ACK after having sent a SYN.
TIME-WAIT
if waiting for sufficient time to pass (about two round trips) to be sure that stray
packets are flushed from the network.
Laddr
is the local Internet address associated with the socket, displayed as four-decimal
octets.
Lport
is the local port number for either TCP or UDP, depending on the value of Proto.
The more common port values are displayed in text form; others are displayed as
four-decimal octets.
Faddr
is the foreign (remote) Internet address associated with the socket, displayed in
four-decimal octets.
Fport
is the foreign port number for either TCP or UDP, depending on the value of Proto.
The more common port values are displayed in text form; others are displayed as
four-decimal octets.
SendQ
is the number of bytes of data in the send queue of the socket.
RecvQ
is the number of bytes of data in the receive queue of the socket.
Multicast Groups
indicates the IP multicast group addresses that the TCP/IP connection is listening
to.
Multicast Group States
is the state of the multicast groups. Possible values are:
STARTED
indicates that multicast is operational for the group.