TCP/IP Configuration and Management Manual

SCF Reference
TCP/IP Configuration and Management Manual—427132-004
4-102
STATUS SUBNET Command
State
indicates the current state for the SERVER object. Possible values are:
Endpoint
is the handle being used by the ATM address entry.
Subnet
shows the SUBNET to which the server is assigned.
AtmAddr
shows the ATM address of the destination.
STATUS SUBNET Command
The STATUS SUBNET command displays the dynamic state of the TCP/IP SUBNETs.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
SUBNET subnet-spec
names the point of connection between the NonStop TCP/IP process and an I/O
device. The fully-qualified subnet-spec has the form:
If you specify the SCF object type (SUBNET) or any portion of the object name
(subnet-spec) in a prior ASSUME command, you can omit it in this command.
For information about the ASSUME command, see the SCF Reference Manual for
G-Series RVUs or the SCF Reference Manual for H-Series RVUs.
FREE Not is use.
CONNECTING waiting for an ATM API Connect command to complete.
REGISTERING Waiting for an ATMARP reply to an ATMARP request to
register the SUBNET’s IP address with the ATMARP
server.
REGISTERED The SUBNET has successfully registered with the
ATMARP server.
STATUS [ / OUT file spec / ] [ SUBNET subnet-spec ]
$process-name . #subnet-name