TCP/IP Configuration and Management Manual

About This Manual
TCP/IP Configuration and Management Manual—427132-004
xviii
Notation Conventions
Notation Conventions
Hypertext Links
Blue underline is used to indicate a hypertext link within text. By clicking a passage of
text with a blue underline, you are taken to the location described. For example:
This requirement is described under Backup DAM Volumes and Physical Disk
Drives on page 3-2.
General Syntax Notation
The following list summarizes the notation conventions for syntax presentation in this
manual.
UPPERCASE LETTERS. Uppercase letters indicate keywords and reserved words; enter
these items exactly as shown. Items not enclosed in brackets are required. For
example:
MAXATTACH
lowercase italic letters. Lowercase italic letters indicate variable items that you supply.
Items not enclosed in brackets are required. For example:
file-name
computer type. Computer type letters within text indicate C and Open System Services
(OSS) keywords and reserved words; enter these items exactly as shown. Items not
enclosed in brackets are required. For example:
myfile.c
Appendix C, Well-Known Port Numbers for
TCP and UDP
This appendix lists the port numbers
preassigned to specific services when
accessed from TCP or UDP.
Appendix D, SCF Command Summary
This appendix summarizes the SCF
command syntax.
Appendix E, SCF Error Messages
This appendix contains a description of the
TCP/IP subsystem SCF error messages.
Appendix F, NonStop Systems Used as
Internet Gateways
This appendix describes the use of a
NonStop system as an internet gateway.
Glossary
Defines the terms used in this manual.
Section and Title Description