TCP/IP Configuration and Management Manual

SCF Reference
TCP/IP Configuration and Management Manual—427132-004
4-116
LABEL Command
Considerations

The NonStop TCP/IP HEX command is implemented in the standards defined in
the PTrace Reference Manual.

If the HEX command is not used, the OFF attribute is assumed.

If HEX is specified without the ON or OFF attribute, the ON attribute is assumed.

The RESET and FROM commands set the HEX command to OFF.
LABEL Command
The LABEL command controls the formatted display of trace records.
Command Syntax
ON
turns on the formatted display of trace records. The default value is ON.
OFF
turns off the formatted display of trace records, but the record header for the trace
record is displayed.
Considerations

If the LABEL command is not used, the ON attribute is assumed.

If LABEL is specified without the ON or OFF attribute, the ON attribute is assumed.

The RESET and FROM commands set the LABEL command to ON.
OCTAL Command
The OCTAL command controls the octal display option. When OCTAL is set to ON,
PTrace displays an octal dump of trace-file records (excluding the record header), with
character equivalents printed to the right of the dump.
Command Syntax
ON
turns on octal display mode.
LABEL [ ON | OFF ]
Note. The LABEL command is the only way to display NonStop TCP/IP trace records.
OCTAL [ ON | OFF ]