TCP/IP Configuration and Management Manual

SCF Reference
TCP/IP Configuration and Management Manual—427132-004
4-119
TEXT Command
TEXT Command
The TEXT command controls the text display option. When TEXT is set to ON, PTrace
displays an interpreted text of trace-file records (excluding the record header). The
textual display appears below labeled data, the HEX display, and the OCTAL display, if
they are present. The textual display consists of ASCII characters, with control codes
represented by two- or three-character mnemonics.
Command Syntax
ON
turns on text display mode.
OFF
turns off text display mode.
Considerations

The NonStop TCP/IP TEXT command is implemented in the standards defined in
the PTrace Reference Manual.

If the TEXT command is not used, the OFF attribute is assumed.

If TEXT is specified without the ON or OFF attribute, the ON attribute is assumed.

The RESET and FROM commands set the TEXT command to OFF.
Trace Record Formats
This subsection describes the formatted NonStop TCP/IP trace records. The records
are presented in alphabetical order under the SELECT keyword used to display them.
The SELECT keyword categories are presented in numeric order, based on their
record-type code, as follows:
TEXT [ ON | OFF ]
Type Record
1SOCKCR
2MBUF
3 IPC
4TCP
5 and
6
UDPI and UDPDI
7 UDPO and UDPDO
9IPI
10 IPO