TCP/IP Configuration and Management Manual

Configuration Quick Start
TCP/IP Configuration and Management Manual—427132-004
1-2
Name of a SLSA LIF
Name of a SLSA LIF
Follow the instructions below to obtain the name of a SLSA LIF.
1. Obtain a list of all LIFs by entering the following command at the SCF prompt:
STATUS LIF $ZZLAN.*
2. Using one of the LIF names displayed, determine if the LIF is of TYPE ETHERNET
by entering toe following command:
INFO LIF $ZZLAN.lifname
3. Ensure that the LIF is accessible to all processors on which you plant to run
NonStop TCP/IP by entering the following command:
STATUS LIF $ZZLAN.lifname, DETAIL
In the display, the field named “CPUs with Data Path” lists the available
processors.
Example 1-1 uses the LIF name LAN01.
This is item 3 in the configuration form.
Gateway Router Address
The gateway router address for connection to non-local systems must be an IP
address associated with a router on your network subnet. Get the gateway router
address from the network administrator.
Example 1-1 uses the router address 150.20.30.2.
This is item 4 in the configuration form.
Domain Name
The domain name is arbitrary, you assign it. Example 1-3 uses the domain name
mydomain.com. This is item 5 in the configuration form.
Domain Name Server Address
Get the domain name server (DNS) address from the DNS administrator. Example 1-3
uses the domain name server address mydomain.com. This is item 6 in the
configuration form.
IP Address of Second Host
Get the IP address of the second host from your network administrator. Example 1-4
uses the IP address 150.20.30.3. This is item 7 in the configuration form.