TCP/IP Configuration and Management Manual

SCF Error Messages
TCP/IP Configuration and Management Manual—427132-004
E-2
TCPIP 00005
attribute-name
is the name of the attribute you specified in an ALTER PROCESS command.
Cause. You specified a value for the ALTER PROCESS command that is outside the
valid range.
Effect. The command is not executed.
Recovery. Enter a valid range for the command and retry it. Refer to the ALTER
command in Section 4, SCF Reference
, for more information on valid ranges.
TCPIP 00007
Cause. The IP address you specified in the ADD SUBNET or ALTER SUBNET
command is already being used by another interface.
Effect. The command is not executed.
Recovery. Specify a different IP address and retry the command.
TCPIP 00008
Cause. The gateway you specified in the ADD ROUTE command is unavailable.
Effect. The command is not executed.
Recovery. Specify an available gateway and retry the command.
TCPIP 00009
Cause. A file-system error occurred.
Effect. The command is not executed.
Recovery. Take an action based on the file system error received.
TCPIP 00005 Attribute value out of range attribute-name.
TCPIP 00007 Duplicate address.
TCPIP 00008 Gateway Network Unreachable.
TCPIP 00009 Filesystem error.