TCP/IP Configuration and Management Manual

SCF Error Messages
TCP/IP Configuration and Management Manual—427132-004
E-4
Effect. The command is not executed.
Recovery. Use the RECSIZE parameter while starting a trace. When a larger trace
record size is used, there is less chance of trace records being truncated.
TCPIP 00019
Cause. This occurs when a Primary command is rejected because at least one subnet
is still in the started state and switching to another CPU. This takes any started subnets
out of service.
Effect. The command is not executed.
Recovery. Try moving the LAN access interfaces to TCP/IP subsystem backup CPU
first.
TCPIP 00020
Cause. Device selected for subnet not available between the same CPU pair as the
TCP/IP process.
Effect. The command is not executed.
Recovery. Select a device that is available between the same CPU pair as the TCP/IP
process or stop the TCP/IP process and restart it specifying a CPU pair that has
access to the device.
TCPIP 00021
Cause. Physical access to the device does not exist. Either the device is not installed
or a failure has occurred.
Effect. The command is not executed.
Recovery. Select a device that is available or correct the problem.
TCPIP 00022
Cause. Incorrect device name specified.
TCPIP 00019 Primary not allowed, some subnets still in
STARTED state.
TCPIP 00020 Device access not available from same CPU as
TCPIP.
Device access not available from any CPU.
Unknown LIF device name.