TCP/IP Configuration and Management Manual

Configuration Quick Start
TCP/IP Configuration and Management Manual—427132-004
1-4
IP Address of the SUBNET
IP Address of the SUBNET
Get the SUBNET IP address from the network administrator. Example 1-6 uses the
address 172.16.192.203. This is item 13 in the configuration form.
DEVICENAME for the Adapter
To choose a DEVICENAME for an adapter, issue the following command at the SCF
prompt:
NAMES ADAPTER $ZZATM.*
This command results in a listing of the operational ATM adapters on the system.
Choose an adapter and use its name as the DEVICENAME for the adapter.
Example 1-6 uses the DEVICENAME $AM2.
This is item 14 in the configuration form.
Server Name
Server names are arbitrary, you assign them. Example 1-6 uses the server names
#SRV1 and #SRV2. This is item 15 in the configuration form.
Server ATM Address
Get the server ATM addresses from the network administrator. Example 1-6 uses the
following server ATM addresses:
H47000580FFE1000000F21A29EB0000000001A500
H47000580FFE1000000F21A29EB000000000A300
This is item 16 in the configuration form.
Subnet Mask Used on Local Subnet
The subnet mask used on the local subnet depends on the IP class and your network
set up. Get this mask from the network administrator. Example 1-6
uses the subnet
mask 255.255.255.0 in dot notation (%hffffff00 in hexadecimal format). This is item 17
in the configuration form.
Route Name
The route name is arbitrary, you assign it. Example 1-6 uses the route name #DEF.
(Route name #RT is reserved.) This is item 18 in the configuration form.
Entry Name
The entry name is arbitrary, you assign it. Example 1-6 uses the entry name #A2. This
is item 19 in the configuration form.