TCP/IP Configuration and Management Manual

Configuration Quick Start
TCP/IP Configuration and Management Manual—427132-004
1-6
Assumptions
Task 2: Create a command file
Task 3: Start the NonStop TCP/IP Environment
Assumptions

The SCF environment is operational (that is, SCP is running)

QIOMON is running

The SLSA subsystem is configured (see the LAN Configuration and Management
Manual to configure the SLSA subsystem)
You need to substitute real values for the following values; (these variables are
indicated by italics in the example):

IP Address of Host being set up (the example uses 150.20.30.1)

Host Name of host being set up (the example uses breeze)

Subnet Mask Used on Local Subnet (the example uses 255.255.255.0 in dot
notation, which is %hffffff00 in hexadecimal format)

Name of a SLSA LIF (the example uses LAN01). See the Hint below for choosing
an appropriate LIF.

Gateway Router Address for connection to non-local systems (the example uses
150.20.30.2)