TCP/IP Configuration and Management Manual

Glossary
TCP/IP Configuration and Management Manual427132-004
Glossary-10
LANMON
LANMON. See LAN monitor (LANMON) process.
LAN monitor (LANMON) process. The process provided as part of the ServerNet local
area network (LAN) systems access (SLSA) subsystem that has ownership of the
Ethernet adapters controlled by the SLSA subsystem.
LAPB (Link Access Protocol —Balanced). ITU-T standards that define in the Data Link
Layer the requirements for X.25 connections over wide area networks (WANs).
Level 2. A reference to LINK LEVEL communication (for example, frame formats) or link-
level connections derived from the ISO 7-layer reference model. For long-haul
networks, level 2 refers to the communication between a host computer and a network
packet switch (for example, HDLC/LAPB). For local area networks, level 2 refers to
physical packet transmission. Thus, a level 2 address is a physical hardware address.
Level 3. A reference to NETWORK-level communication derived from the ISO 7-layer
reference model. For the Internet, level 3 refers to the IP and IP datagram formats.
Thus, a level 3 address is an Internet address.
LIF. See logical interface (LIF).
LLC (Logical Link Control). See Logical Link Control (LLC).
local area network (LAN). A network that is located in a small geographical area and
whose communications technology provides a high-bandwidth, low-cost medium to
which low-cost nodes can be connected. One or more LANs can be connected to the
system such that the LAN users can access the system as if their workstations were
connected directly to it.
logical interface (LIF). The interface that allows an application or another process to
communicate with data communications hardware.
Logical Link Control (LLC). An IEEE 802.2 standard for the Data Link Layer of the OSI
Reference Model that defines both connection-oriented and connectionless standards
over LAN networks.
MAC address (Media Access Control Address). A MAC address is a value in the Medium
Access Control sublayer of the IEEE/ISO/ANSI LAN architecture, that uniquely
identifies an individual station that implements a single point of physical attachment to
a LAN.
management applications. In DSM, an application process that opens a management or
subsystem process to control a subsystem. This process can issue SPI commands to
subsystems and retrieve EMS event messages to assist in the management of a
computer system or a network of systems. A management application is a requester to
the subsystems to which it sends commands; the subsystems are servers to the
management application.