TCP/IP Configuration and Management Manual

Configuration Quick Start

TCP/IP Configuration and Management Manual—427132-004

1-15

Assumptions



The SCF environment is operational (that is, SCP is running)



QIOMON is running



The ATM subsystem is configured (see the ATM Configuration and Management

Manual to configure the ATM subsystem)



You must have the correct ATM address (see your network manager)

You need to substitute real values for the following variables (indicated by italics in the

example):



TCP/IP Process Name (the example uses $ZTC1). See the Hint on page 1-13 for

information on how to choose the primary and backup CPUs.



SUBNET Name (the example uses #EN1)



IP Address of the SUBNET (the example uses 172.16.192.203)



DEVICENAME for the Adapter (the example uses $AM2). See the Hint on

page 1-13 for information on how to choose the adapter/device name.



Subnet Mask Used on Local Subnet (the example uses 255.255.255.0 in dot

notation, which is %hffffff00 in hexadecimal format)



Host Name (the example uses “TCPX”)



Route Name (the example uses #DEF (remember #RO U is reserved))



Gateway Router Address for connection to non-local systems (the example uses

172.16.192.1)



Entry Name (the example uses #A2)



ATM Address of the Entry (the example uses

%H47000580FFE1000000F21A29EB0000000001A100)

Tasks

1. Create a TACL command file with the contents shown in Example 1-6.