TCP/IP Management Programming Manual

Commands and Responses
HP NonStop TCP/IP Management Programming Manual—529636-001
6-38
INFO Command
ZIOPNAME
is a 32-byte internal file name that specifies the name of the SLSA LIF or the
X25AM device with which the subnet interfaces.
The TCP/IP subsystem automatically adds a route with a destination address
equal to the value specified in the network portion of the ZIP-ADDR field
converted to its broadcast form, and a gateway address equal to the value
specified as the IP address of the subnet in the ZIP-ADDR field, whenever a
subnet is added.
ZTYPE
is an enumerated value that specifies the type of subnet. The possible subnet
type values (ZTCI-VAL-SUBNET-TYPE-) are:
ENET
indicates that the subnet is associated with a SLSA LIF using an Ethernet
filter.
LOOP
indicates that the subnet is associated with the loopback driver and is for
testing.
SNAP
indicates that the subnet is associated with a SLSA LIF using an LLC1
filter.
X25
indicates that the subnet is associated with an X25AM device.
ZSU-NAME
is an eight-character string that indicates the name of X25AM.
ZFORCE-QIO
is a Boolean variable that specifies whether the SUBNET object should only
use the QIO direct interface to the controller.
ZSPI-VAL-TRUE
indicates that the SUBNET object is to use the QIO direct interface to the
controller.
Note. The SLSA LIF’s format is not that of a real internal file name. If you are using the
SCF DETAIL CMDBUFFER ON command and DETAIL RSPBUFFER ON commands to
examine this token, it will not display correctly for the SLSA LIF.