TCP/IP Management Programming Manual

Commands and Responses
HP NonStop TCP/IP Management Programming Manual—529636-001
6-50
RESETSTATS Command
ZSPI-TKN-CONTEXT
specifies whether the response continues with more response messages. If this
token is present, the response continues. If this token is not present, this response
message is the last of the response. For more details, see SPI Standard
Definitions on page 5-1.
Operational Notes
•
LISTOPENS is a nonsensitive command.
•
When the LISTOPENS command is completed, the PROC object remains in the
same summary state as before the command was executed.
RESETSTATS Command
The RESETSTATS command returns the execution history statistics for the specified
object(s). The type of information returned by this command is the same as that
returned by the STATISTICS command, but this command initializes the statistics
counters after the information is placed in a response message. The RESETSTATS
command is a sensitive command.
Various statistics counters are maintained during the sample period defined by the
RESET-TIME and CURR-TIME fields.
You can issue this command for a process, subnet, or route. You can use an object-
name template with the SUBNET and ROUTE objects to return statistics about multiple
subnets or routes. For more details, see Object-Name Templates on page 3-6.
The summary state of the object is not checked by the TCP/IP subsystem when you
issue the RESETSTATS command.
Command
ZCOM-CMD-RESETSTATS
Object Type
ZOM-OBJ-ADDRMAP or ZCOM-OBJ-PROC or ZCOM-OBJ-SUBNET or ZCOM-
OBJ-ROUTE
Tokens in Command Buffer
ZSPI-TKN-SSID token-type ZSPI-TYP-SSID. !{}
ZCOM-TKN-OBJNAME token-type ZSPI-TYP-STRING. !{}
ZSPI-TKN-MAXRESP token-type ZSPI-TYP-INT.
ZSPI-TKN-CONTEXT token-type ZSPI-TYP-BYTESTRING.
ZSPI-TKN-ALLOW-TYPE token-type ZSPI-TYP-ENUM.
ZSPI-TKN-COMMENT token-type ZSPI-TYP-STRING.