TCP/IP Management Programming Manual

Commands and Responses
HP NonStop TCP/IP Management Programming Manual—529636-001
6-68
RESETSTATS Command
ZSTATS-SUBNET-OUT-ERRS
is the number of errors that occurred while the subnet interface was sending
packets during the sample period. Each output error also generates one of
these event messages: ZTCI-EVT-IOP-READ-ERR,
ZTCI-EVT-IOP-WRITE-ERR, or ZTCI-EVT-IOP-AWAITIO-ERR.
ZSTATS-SUBNET-IN-ERRS
is the number of errors that occurred while the subnet interface was receiving
packets during the sample period. Each input error also generates one of these
event messages: ZTCI-EVT-IOP-READ-ERR, ZTCI-EVT-IOP-WRITE-ERR, or
ZTCI-EVT-IOP-AWAITIO-ERR.
ZSTATS-SUBNET-CURR-TIME
is the time at which the TCP/IP process read the subnet statistics counters.
This time indicates the end of the sample period.
ZSTATS-SUBNET-RESET-TIME
is the time at which the subnet statistics counters were last reset. This time
indicates the beginning of the sample period.
ZTCI-MAP-STATS-ROUTE
is the extensible structured token that lists the statistics counters maintained for the
route during the sample period. These statistics are returned only for the ROUTE
object. This token has the token number ZTCI-TNM-STATS-ROUTE and the DDL
definition ZTCI-DDL-STATS-ROUTE.
The fields in the ZTCI-MAP-STATS-ROUTE token are:
ZUSAGE
indicates the number of times the specified route has been used to send IP
datagrams.
ZSTATS-ROUTE-CURR-TIME
is the time at which the TCP/IP process read the route statistics counters. This
time indicates the end of the sample period.
ZSTATS-ROUTE-RESET-TIME
is the time at which the route statistics counters were last reset. This time
indicates the beginning of the sample period.
ZCOM-TKN-OBJNAME
specifies the name of a TCP/IP object for which statistics information was
requested. Unless there is an error that prevents the RESETSTATS command from
being attempted at all, this token is present in every response record.