TCP/IP Management Programming Manual

Commands and Responses
HP NonStop TCP/IP Management Programming Manual—529636-001
6-113
TRACE Command
UDP-DETL-IN
traces UDP Layer input detail.
UDP-DETL-OUT
traces UDP Layer output detail.
UDP-IN
traces UDP Layer input.
UDP-OUT
traces UDP Layer output.
UDP-USER-REQ
traces UDP user requests.
ZCOM-TKN-OBJNAME
specifies the process or subnet to be traced. Your application must provide this
token in the command. The object name cannot be an object-name template. This
token is described in Data Communications Standard Definitions on page 5-9.
(ZSPI-TKN-) MAXRESP, ALLOW-TYPE, and COMMENT
are standard SPI tokens that your application can provide. These tokens are
described in SPI Standard Definitions on page 5-1.
Tokens in Response Buffer
ZSPI-TKN-SSID
is an echo of the subsystem ID value provided in the command by your application.
For more details, see SPI Standard Definitions on page 5-1.
ZSPI-TKN-SERVER-VERSION
indicates the software release version of the TCP/IP subsystem. For more details,
see SPI Standard Definitions on page 5-1.
ZSPI-TKN-DATALIST
indicates the beginning of a data list. The ZSPI-TKN-MAXRESP token must have
a value other than zero for data lists to be included in the response. For more
details, see SPI Standard Definitions on page 5-1.
ZCOM-TKN-OBJNAME
specifies the name of the TCP/IP process or subnet for which a trace was started
or stopped. Unless there is an error that prevents the TRACE command from being