TCP/IP Management Programming Manual

Event Management
HP NonStop TCP/IP Management Programming Manual—529636-001
7-13
5: ZTCI-EVT-SUMSTATE-CHG
ZCOM-TKN-SUBJ-SUBNET
contains the name of the TCP/IP subnet that is the subject of this event message.
ZEMS-TKN-EMPHASIS
is a header token that contains the value ZSPI-VAL-FALSE, indicating that this is
not a critical event.
(ZEMS-TKN-) CONSOLE-PRINT, CPU, CRTPID, GENTIME, LOGTIME, PIN,
SYSTEM, and USERID
are automatically placed in the header when the EMSINIT procedure is called and
the event message buffer is initialized. For a description of these tokens, see
Section 5, Common Definitions. For details on any of the EMS tokens, see the
EMS Manual.
ZTCI-TKN-SEV
contains the value ZTCI-VAL-SEV-INFO. This value indicates that
ZTCI-EVT-SUMSTATE-CHG is an informational message only. No recovery action
is necessary.
ZTCI-TKN-IOPNAME
contains the name of the SLSA LIF or X25AM line and subdevice (for X.25
subnets) being accessed by the TCP/IP process for transmitting and receiving data
when the summary state change occurred.
ZCOM-TKN-OBJSTATE
is the summary state of the object after the change has taken place. It corresponds
to the value of new-state in the message text.
ZCOM-TKN-OLD-OBJSTATE
is the summary state of the object before the change took place. It corresponds to
the value of old-state in the message text.
ZCOM-TKN-CAUSE-SUMSTATE-CHG
is the reason the summary state has changed. The value can be one of these:
ZTCI-VAL-CAUSE-ERR
indicates the change occurred because of an error that occurred on the subnet
interface.
ZTCI-VAL-CAUSE-OP
indicates the change occurred because of a command.