TCP/IP Management Programming Manual

Management Programming
HP NonStop TCP/IP Management Programming Manual—529636-001
2-7
Communicating With the TCP/IP Subsystem
5. Check for error codes and handle any errors.
6. Decode the response.
7. Take appropriate action and return to Step 2, if necessary.
8. Terminate communication with the SCP or the EMS distributor process.
All data communications subsystems must use the same message protocol for
communicating with SCP. For details on this protocol, see the SPI Common Extensions
Manual and the SPI Programming Manual. For more information about communicating
with the EMS distributor process, see the EMS Manual.