TCP/IP Management Programming Manual

Commands and Responses
HP NonStop TCP/IP Management Programming Manual—529636-001
6-9
ADD Command
does not exceed the limit defined for each object type. If either of these checks fails,
the TCP/IP subsystem returns an error.
The maximum number of subnets you can add is 17 (4 Ethernet, 8 SNAP (4 token ring
and 4 Ethernet), 4 X.25, and 1 loopback). Adding routes is optional because the
TCP/IP subsystem automatically adds a route when you add a subnet. The maximum
number of routes you can add depends on the resources currently in use.
Note. For information on NonStop availability considerations, see the TCP/IP Configuration
and Management Manual.
Command
ZCOM-CMD-ADD
Object Type
ZCOM-OBJ-SUBNET or ZCOM-OBJ-ROUTE or ZCOM-OBJ-ADDRMAP