TCP/IP (Parallel Library) Configuration and Management Manual

HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006
xi
About This Manual
This manual describes how to configure and manage the Parallel Library TCP/IP
subsystem.
Who Should Use This Manual
System and network managers, operators, and others who configure and manage the
Parallel Library TCP/IP subsystem should use this manual.
How to Use This Manual
Use this manual to configure Parallel Library TCP/IP on your system in conjunction
with the TCP/IP (Parallel Library) Migration Guide. The TCP/IP (Parallel Library)
Migration Guide lists migration considerations that could affect your configuration.
Table i. Summary of Contents (page1of2)
Section Title This section...
1 Configuration Quick Start
provides configuration procedures for setting
up and shutting down a basic Parallel Library
TCP/IP environment. Use this section if you
want to get the subsystem started without first
gaining a full understanding of Parallel Library
TCP/IP, or if you are already familiar with the
subsystem and just want basic subsystem
configuration procedures.
2 Introduction
explains the subsystem architecture and
explains the new features of Parallel Library
TCP/IP such as round-robin filtering and single
IP. In addition, this section provides term
definitions, and discusses the current
restrictions of Parallel Library TCP/IP and its
relationship to other products as well as RFC
compliance and online help.
3 Configuring Parallel Library
TCP/IP for Complex and
Heavy-Use Environments
goes into more complex configuration
examples that tell you how to maximize the
benefits of Parallel Library TCP/IP.
4 Managing the Parallel Library
TCP/IP Subsystem
provides information about managing the
subsystem.
5 SCF Reference for Parallel
Library TCP/IP
provides a reference for the SCF commands
used for managing the subsystem.
6 Troubleshooting Tips
provides tips for solving common problems
encountered when configuring Parallel Library
TCP/IP.