TCP/IP (Parallel Library) Configuration and Management Manual

SCF Reference for Parallel Library TCP/IP
HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006
5-25
ALTER Command
ALTER Command
The ALTER command changes attribute values associated with the specified PTCPIP
object. This is a sensitive command.
ALTER MON Command for TCPMAN
The ALTER MON command is used to change the attribute values of the Parallel
Library TCP/IP subsystem. When you alter attributes of a TCPMON process you must
do so on all configured PTCPIP TCPMONs. Hence, only the wild card is supported for
the TCPMON object.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
MON $ZZTCP.*
specifies all configured TCPMONs. When you alter the MON, you must do so on
all configured MONs.
ALTER [ /OUT file-spec/ ] MON $ZZTCP.*
[ ,TCPSENDSPACE int ]
[ ,TCPRECVSPACE int ]
[ ,UDPSENDSPACE int ]
[ ,UDPRECVSPACE int ]
[ ,DELAYACKS { ON | OFF } ]
[ ,DELAYACKSTIME int ]
[ ,HOSTNAME string ]
[ ,HOSTID int ]
[ ,TCPKEEPIDLE int ]
[ ,TCPKEEPINTVL int ]
[ ,TCPKEEPCNT int ]
[ ,DEBUG { ON | OFF } ]
[ ,FULLDUMP { ON | OFF } ]
[ ,ALLNETSARELOCAL { ON | OFF } ]
[ ,TCPCOMPAT42 { ON | OFF } ]
[ ,EXPANDSECURITY { ON | OFF } ]
[ ,TCPPATHMTU { ON | OFF } ]
[ ,TCPTIMEWAIT int ]
[ ,RFC1323-ENABLE { ON | OFF } ]
[ ,TCP-INIT-REXMIT-TIMEOUT int ]
[ ,TCP-MIN-REXMIT-TIMEOUT int ]
[ ,TCP-LISTEN-QUE-MIN int ]
[ ,INITIAL-TTL int ]
[ ,MIN-EPHEMERAL-PORT int ]
[ ,MAX-EPHEMERAL-PORT int ]