TCP/IP (Parallel Library) Configuration and Management Manual

SCF Reference for Parallel Library TCP/IP
HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006
5-36
INFO Command
Examples
The following command deletes all subnets in the Parallel Library TCP/IP:
SCF> DELETE SUBNET $ZZTCP.*.*
Considerations
•
The object-name template (wild-card notation) is supported.
•
When the DELETE operation is completed, the definition of the subnet you
specified for deletion is removed from the system configuration database.
•
Before you can delete a subnet, it must be in the STOPPED summary state.
•
The DELETE SUBNET operation also deletes all the routes dependent on this
interface/subnet and removes the static routes dependent on this interface/subnet
from the system configuration database.
•
A subnet configured with failover enabled cannot be deleted unless its associated
brother is also brought to the STOPPED state.
•
When one of the subnet in the failover pair is deleted, the associated subnet of this
subnet is also deleted.
•
When one of the subnet in the failover pair is deleted, the Failover Alias IP address
and all the additional aliases in its brother are also removed.
INFO Command
The INFO command displays the current attribute values for the
specified PTCPIP object. Alterable attributes are indicated with
an asterisk (*).
This is a nonsensitive command.
INFO ENTRY Command for TCPMAN
The INFO ENTRY command displays the ARP table for the given entry.
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
INFO [ /OUT file-spec/ ] [ ENTRY $ZZTCP.#ZPTMn.entry-name ]
[ , IPADDRESS ip-addr | , OBEYFORM]