TCP/IP (Parallel Library) Configuration and Management Manual

SCF Reference for Parallel Library TCP/IP
HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006
5-40
INFO MON Command for TCPMAN
Delay Ack Time
is the amount of time in 10 ms intervals that the acknowledgments are delayed.
Delay Ack
is a switch indicating if TCP is delaying acknowledgments.
Keep Alive Idle
is the amount of time in seconds before TCP issues a keep alive packet on sockets
that have enabled this option.
Keep Alive Retry Cnt
is the number of times a keep alive packet is sent without receiving an
acknowledgment, after which the TCP connection is dropped.
Keep Alive Interval
is the time interval in seconds between retransmissions of unacknowledged
keep-alive packets.
QIO Limit
is a percentage between 0 and 100, representing the amount of queued I/O or
shared memory allowed to this process. This attribute is not used by Parallel
Library TCP/IP. The default is 100 percent.
Host Id
is the ID (usually the host number part of the internet address that is assigned to
this host). It is a 32-bit number.
Host Name
is the official name of the host upon which the PTCPIP process is running is known
in the Internet. This is a character string no longer than 50 characters. The default
is the EXPAND node name with the leading “\” stripped off.
Program File Name
is the name of the file that is being executed for this process.
Debug
is the current setting (ON or OFF) of the DEBUG attribute. Debug is used by HP
support and development personnel.
Full Dump
is a switch that allows the PTCPIP process to either save the QIO segment when
abending if set to ON or just the stack if set to OFF.