TCP/IP (Parallel Library) Configuration and Management Manual

SCF Reference for Parallel Library TCP/IP
HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006
5-44
INFO PROCESS Command for TCPSAM
INFO PROCESS Display Format
The format of the display for the INFO PROCESS command both with and without the
DETAIL option is the same:
PROCESS $ZZTCP
is the name of the manager process (TCPMAN). If you omit the object name, SCF
uses the assumed object name. For information about the ASSUME command,
see the SCF Reference Manual for G-Series RVUs.
PPID
is the primary processor and PIN of the process.
BPID
is the backup processor and PIN of the process.
INFO PROCESS Command for TCPSAM
This command displays the current attribute settings for the TCPSAM process.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
DETAIL
specifies that the display is to include additional detailed information on the object.
PROCESS tcpman-name
is the name of the socket access method process (TCPSAM). If you omit the
object name, SCF uses the assumed object name. For information about the
ASSUME command, see the SCF Reference Manual for G-Series RVUs.
TCPMAN Info Process \SYSTEM.$ZZTCP
PPID............ ( 2,289) BPID................... ( 3,271)
INFO [ / OUT file-spec / ] [ PROCESS tcpsam-name ] [, DETAIL]