TCP/IP (Parallel Library) Configuration and Management Manual

SCF Reference for Parallel Library TCP/IP
HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006
5-45
INFO PROCESS Command for TCPSAM
Examples
The following commands request the non-detailed and the detailed information for the
TCPSAM process named $SAM1:
-> INFO PROCESS $SAM1
-> INFO PROCESS $SAM1 , DETAIL
INFO PROCESS Display Format
The format of the display for the INFO PROCESS command without the DETAIL option
is (an asterisk (*) an alterable attribute; however, see Considerations on page 5-48):
The format of the display for the INFO PROCESS command with the DETAIL option is:
TCP Send Space
is the amount of data (in bytes) that can be buffered in the TCP layer when sending
data to a remote site.
TCPIP Info PROCESS \BOBAFET.$SAM1
*TCPSendSpace *TCPReceiveSpace *UDPSendSpace *UDPReceiveSpace
8192 8192 9216 41600
TCPIP Detailed Info PROCESS \BEAR.$SAM1
*TCP Send Space ...... 8192 *TCP Receive Space .. 8192
*UDP Send Space ...... 2048 *UDP Receive Space .. 4128
*Delay Ack Time....... 5 *Delay Ack........... ON
*Keep Alive Idle...... 7200 *Keep Alive Retry Cnt 8
*Keep Alive Interval.. 75 QIO Limit........... 100%
*Host Id.............. 0D
*Host Name ........... tcp0
Program Filename..... \BEAR.$SYSTEM.SYS02.TCPSAM
*Debug ............... OFF
*Full Dump............ ON
*All Nets Are Local... ON
*TCP Compat 42........ ON
*EXPAND Security...... OFF
*TCP Path MTU......... OFF
*TCP Time Wait........ 60
Trace Status.......... OFF
Trace Filename .......
*RFC1323 Enable ...... ON
*TCP Init Rexmit Timeout 1000 ms
*TCP Min Rexmit Timeout. 400 ms
*TCP Listen Queue Min... 5
*Initial TTL............ 6