TCP/IP (Parallel Library) Configuration and Management Manual

SCF Reference for Parallel Library TCP/IP
HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006
5-52
INFO ROUTE Command for TCPSAM
Considerations
•
The implicit route generated internally from the ADD SUBNET command has the
cloning flag set. See the ADD ROUTE help text for a detailed description of the
cloning capability of a route.
•
Link level routes, generated internally by the ARP logic, cannot be stopped
externally through the SCF ABORT or STOP ROUTE commands but can be
deleted externally through the SCF DELETE ROUTE command.
INFO ROUTE Command for TCPSAM
The INFO ROUTE command displays attribute settings for the specified route(s)
configured on the TCPMON object in the TCPSAM primary processor. This is a
nonsensitive command.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
ROUTE $tcpsam-name.route-name
is the name of the route. If you omit the object name, SCF uses the assumed
object name. You do not need to ASSUME the MON object; if you omit it, the wild
card (*) is assumed. For information about the ASSUME command, see the SCF
Reference Manual for G-Series RVUs.
OBEYFORM
where OBEYFORM causes the static route configuration to be displayed in ADD
ROUTE format, so that this configuration can be re-created.
Examples
-> INFO ROUTE $ZSAM2.*
-> INFO ROUTE *, OBEYFORM
INFO [ /OUT file-spec/ ] [ ROUTE $tcpsam-name.route-name ]
[ , OBEYFORM]