TCP/IP (Parallel Library) Configuration and Management Manual

SCF Reference for Parallel Library TCP/IP
HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006
5-57
INFO SUBNET Command for TCPMAN
TYPE
is the subnet type. Possible values are Ethernet and loopback.
SUBNETMASK
is a 32-bit integer that specifies which portion of the network number and the IP
host address is to be masked to define a subnet.
QIO
shows whether or not the subnet is currently using the QIO interface. QIO is
always on for Ethernet type subnets. ON indicates that the interface is currently
using QIO mode. OFF indicates that the interface is not currently using QIO mode.
Trace Status
shows whether the subnet is being traced. ON indicates that it is being traced.
Trace Filename
is the name of the current trace file.
Interface MTU
is the maximum transmission unit that can be used on the subnet.
R
shows whether or not the ICMP Router Discovery Protocol (IRDP) has been
enabled on the subnet. The displayed value can be Y (IRDP is ON), or N (IRDP is
OFF).
Multicast Groups
is the list of internet addresses joined by an application.
State
is the filter registration state. The possible state values are: STARTED, STARTING,
and STOPPED.