TCP/IP (Parallel Library) Configuration and Management Manual

SCF Reference for Parallel Library TCP/IP
HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006
5-59
INFO SUBNET Command for TCPSAM
INFO SUBNET for TCPSAM Display Format
The format of the INFO SUBNET display for TCPSAM is (an asterisk (*) indicates an
alterable attribute):
Name
is the name of the subnet.
Devicename
is the name of the SLSA LIF that provides access to the Ethernet LAN. Note that
with loopback subnets, the value \NOSYS.NOIOP, meaning no system, no device
name, is displayed. This value is displayed because loopback subnets are routed
internally so that there is no device name to display.
IPADDRESS
is the Internet address of this subnet and all the IP addresses of the aliases
associated with the subnet.
TYPE
is the subnet type. Possible values are Ethernet and loopback.
SUBNETMASK
is a 32-bit integer that specifies which portion of the network number and the IP
host address is to be masked to define a subnet.
SuName
is not supported for Parallel Library TCP/IP.
QIO
shows whether or not the subnet is currently using the QIO interface. QIO is
always on for Ethernet type subnets. ON indicates that the interface is currently
using QIO mode. OFF indicates that the interface is not currently using QIO mode.
TCPIP Info SUBNET \OSCAR.$ZTC1.*
Name Devicename *IPADDRESS TYPE *SUBNETMASK SuName QIO *R
#LOOP0 \NOSYS.$NOIOP 127.0.0.1 LOOP-BACK %HFF000000 OFF N
TCPIP Info SUBNET \OSCAR.$ZTC1.*
Name Devicename *IPADDRESS TYPE *SUBNETMASK SuName QIO *R
#SN2 \OSCAR.LAN04 172.17.221.74 ETHERNET %HFFFFFF00 ON N