TCP/IP (Parallel Library) Configuration and Management Manual

SCF Reference for Parallel Library TCP/IP
HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006
5-60
LISTOPENS Command
R
shows whether or not the ICMP Router Discovery Protocol (IRDP) has been
enabled on the subnet. The displayed value can be Y (IRDP is ON), or N (IRDP is
OFF).
LISTOPENS Command
The LISTOPENS command returns information on openers of the TCPMONs.
This is a nonsensitive command.
LISTOPENS MON Command for TCPMAN
The LISTOPENS MON command displays information identifying the origins of the
connections in a given TCPMON or in all TCPMONs.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
MON $ZZTCP.#ZPTM{0-F }
is the name of the TCPMON object. If you omit the object name, SCF uses the
assumed object name. For information about the ASSUME command, see the
SCF Reference Manual for G-Series RVUs.
DETAIL
specifies that the display is to include additional detailed information on the object.
Examples
The following commands request non-detailed and detailed information about the
openers of the specified process:
-> LISTOPENS MON $ZZTCP.#ZPTM1
-> LISTOPENS MON $ZZTCP.#ZPTM1, DETAIL
LISTOPENS[ /OUT file-spec/ ] [ MON $ZZTCP.#ZPTM{0-F } ]
[,DETAIL ]