TCP/IP (Parallel Library) Configuration and Management Manual

SCF Reference for Parallel Library TCP/IP
HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006
5-64
LISTOPENS PROCESS Command for TCPSAM
DETAIL
specifies that the display is to include additional detailed information on the object.
Examples
The following commands request non-detailed and detailed information about the
openers of the specified process:
-> LISTOPENS PROCESS $ZTC1
-> LISTOPENS PROCESS $ZTC1, DETAIL
LISTOPENS PROCESS Display Format
The format of the display for the LISTOPENS command without the DETAIL option is:
The format of the display for the LISTOPENS command with the DETAIL option is:
Opener
is the system name and process name of a opener of the TCPSAM Process.
Ppid
is the primary processor and process ID of the opener.
TCPIP Listopens PROCESS \BOBAFET.$ZTC1
Openers PPID BPID PLFN BLFN Protocol Lport
$ZPT0 0,314 4 0 TCP echo
$ZPT0 0,314 5 0 TCP finger
$ZPT0 0,314 6 0 TCP ftp
$ZTN0 0,305 3 0 TCP telnet
TCPIP Detailed Listopens PROCESS \BOBAFET.$ZTCP1
Opener $ZPT0 Ppid 0,314 Bpid Plfn 4 Blfn 0
Proto TCP State LISTEN SendQ 0 RecvQ 0
Laddr 0.0.0.0 Lport echo
Faddr 0.0.0.0 Fport *
Opener $ZPT0 Ppid 0,314 Bpid Plfn 5 Blfn 0
Proto TCP State LISTEN SendQ 0 RecvQ 0
Laddr 0.0.0.0 Lport finger
Faddr 0.0.0.0 Fport *
Opener $ZPT0 Ppid 0,314 Bpid Plfn 6 Blfn 0
Proto TCP State LISTEN SendQ 0 RecvQ 0
Laddr 0.0.0.0 Lport ftp
Faddr 0.0.0.0 Fport *
Opener $ZTN0 Ppid 0,305 Bpid Plfn 3 Blfn 0
Proto TCP State LISTEN SendQ 0 RecvQ 0
Laddr 0.0.0.0 Lport telnet
Faddr 0.0.0.0 Fport *