TCP/IP (Parallel Library) Configuration and Management Manual

SCF Reference for Parallel Library TCP/IP
HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006
5-66
NAMES Command
NAMES Command
The NAMES command displays the names of the specified PTCPIP objects.
This is a nonsensitive command.
NAMES ENTRY Command for TCPMAN
The NAMES ENTRY command displays the names of the ENTRY objects for the
Parallel Library TCP/IP subsystem in a configured TCPMON or in all configured
TCPMONs.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
ENTRY $ZZTCP.#ZPTMn.*
is the name of the entry. The wild card (*) is used in place of the entry-name
because the purpose of the NAMES ENTRY command is to obtain a list of all
entries. If you omit the process name, SCF uses the process name established in
a previous ASSUME command. See the SCF Reference Manual for G-Series
RVUs for more information about the ASSUME command. You may assume the
process and TCPMON and you may use the wild card (*) for the TCPMON and
entry. The wild card used in place of the TCPMON yields a list of entries on all
configured TCPMONs.
Examples
The following command provides a list of entries for all entries on the #ZPTM2
TCPMON.
-> NAMES ENTRY $ZZTCP.#ZPTM2.*
NAMES ENTRY Display Format
The display format of the NAMES ENTRY command is:
NAMES [ /OUT file-spec/ ]
[ ENTRY $ZZTCP.#ZPTMn.* ]
TCPMAN Names ENTRY \BEAR.$ZZTCP.#ZPTM2.*
ENTRY
DA2_1 EA01