TCP/IP (Parallel Library) Configuration and Management Manual

SCF Reference for Parallel Library TCP/IP

HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006

5-67

NAMES ROUTE Command for TCPMAN

The NAMES ROUTE command displays the names of the routes for the Parallel

Library TCP/IP subsystem.

Command Syntax

OUT file-spec

causes any SCF output generated for this command to be directed to the specified

file.

ROUTE ROUTE $ZZTCP.#ZPTMn.*

is the name of the route. The route name is $ZZTCP.#ZPTMn.*. You can

substitute the wild card (*) for the TCPMON name; doing yields NAMES

information for routes on all TCPMONs. The wild card is used in place of the

route-name because the purpose of the NAMES ROUTE command is to obtain

a list of all routes. If you omit the process name, SCF uses the process name

established in a previous ASSUME command. See the SCF Reference Manual for

G-Series RVUs for more information about the ASSUME command.

Examples

The following commands request a list of the routes associated with $ZZTCP.#ZPTM1

and a list of all the routes in the Parallel Library TCP/IP subsystem:

SCF> NAMES ROUTE $ZZTCP.#ZPTM1.*

SCF> NAMES ROUTE $ZZTCP.*.*

NAMES ROUTE Display Format

The format of the display for the NAMES ROUTE command is:

The format of the display for the NAMES ROUTE command for all routes in the Parallel

Library TCP/IP is:

NAMES [ / OUT file-spec / ] [ROUTE $ZZTCP.#ZPTMn.* ]

TCPMAN Names ROUTE \OSCAR.$ZZTCP.#zptm1.*

ROUTE

RT1 RT3 DEF

TCPMAN Names ROUTE \OSCAR.$ZZTCP.*.*

ROUTE

RT1 RT3 DEF