TCP/IP (Parallel Library) Configuration and Management Manual

SCF Reference for Parallel Library TCP/IP

HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006

5-69

NAMES SUBNET Command for TCPMAN

The NAMES SUBNET command for TCPMAN displays the names of the SUBNETs for

the Parallel Library TCP/IP subsystem in a configured TCPMON or in all configured

TCPMONs.

Command Syntax

OUT file-spec

causes any SCF output generated for this command to be directed to the specified

file.

SUBNET $ZZTCP.#ZPTMn.*

is the name of the subnet. The wild card (*) is used in place of the subnet-name

because the purpose of the NAMES SUBNET command is to obtain a list of all

subnets. If you omit the process or TCPMON name, SCF uses the assumed object

name. For information about the ASSUME command, see the SCF Reference

Manual for G-Series RVUs. You may substitute the wild card (*) for the subnet

name which yields the subnet names on all configured subnets.

Examples

The following command requests the names of the subnets associated with #ZPTM2:

SCF> NAMES SUBNET $ZZTCP.#ZPTM2.*

NAMES SUBNET Display Format

The format of the display for the NAMES SUBNET command is:

NAMES [ / OUT file-spec / ]

[ SUBNET $ZZTCP.#ZPTMn.* ]

TCPMAN Names SUBNET \BEAR.$ZZTCP.#ZPTM2.*

SUBNET

LOOP0 EN1 EN2