TCP/IP (Parallel Library) Configuration and Management Manual

About This Manual
HP NonStop TCP/IP (Parallel Library) Configuration and Management Manual—522271-006
xvi
NonStop S-Series System Configuration Manuals
The following manuals provide background material that is helpful for fully using
Parallel Library TCP/IP:
•
The Telserv Manual describes the TELSERV SCF interface. This guide is intended
for configuration and support planners who are responsible for the operation of the
TELSERV subsystem. This guide also provides information about the TN6530
terminal emulation utility.
•
The TCP/IP TELNET Management Programming Manual describes the
command/response interface and the Event Management Service (EMS) interface
available to an application program for communication with the TCP/IP TELNET
process.
•
The QIO Configuration and Management Manual describes how to install and
manage a QIO data communications subsystem. This manual also describes the
SCF commands used to configure, control, and inquire about the QIO subsystem.
•
The Open System Services Shell and Utilities Reference Manual documents the
contents of the inetd configuration file.
•
The TCP/IP Configuration and Management Manual provides some background
information about TCP/IP fundamentals and complete information on the NonStop
TCP/IP product.
•
Introduction to Networking for HP NonStop S-Series Servers provides an overview
of HP networking and data communications concepts, tasks, products, and
manuals. It discusses ways to connect NonStop subsystems to various devices
and networks and it introduces the tools and interfaces you can use.
•
The Guardian User’s Guide provides introductory information and task-oriented
instructions for using the HP Tandem Advanced Command Language (TACL) and
various Guardian environment utilities. The utilities and procedures described in
this guide include many of the more common operations/tasks that users will need
to perform on a system running the NonStop operating system.
NonStop S-Series System Configuration Manuals
You might also need to refer to the following manuals for some configuration and
management tasks:
The SCF Reference Manual for G-Series RVUs describes the operation of SCF and
the commands used to configure, control, and inquire about supported data
communications subsystems. Of particular interest to the Parallel Library TCP/IP
subsystem manager is the information about saving the system configuration
database.
SCF Reference Manual for the Kernel Subsystem describes the SCF interface to the
NonStop Kernel subsystem and useful information about the persistence manager and
generic processes.
The NonStop S-Series FastPath Guide explains how to install and configure a
two-processor or four-processor NonStop S-series server and provides a basic set of